An Employee Owned Company

Minelab Detector Accessories

Shop Online   Facebook   AMDS Forum   Site Map   Contact Us
This page lists various Minelab specific accessory and replacement items normally stocked at Alaska Mining & Diving Supply. Both genuine Minelab and third-party accessories are listed.

Online Store < Metal Detecting Equipment & Supplies < Minelab Detector Accessories

Eureka Gold Hipmount Bag

Eureka Gold Hipmount Bag This genuine Minelab bag with strap allows you to hip or chest mount the Minelab Eureka Gold. Also works with Minelab Sovereign GT control box.  See Details Part#ML30010039  

Minelab Deluxe Carry Bag

Minelab Deluxe Carry Bag This newly redesigned carry bag is suitable for all of Minelab's detectors. This tough padded bag is ideal for storing and transporting your Minelab detector. Extra width at the front of the bag will allow it to fit up to an 18" coil.  See Details Part#ML30010046  

Rain Cover for X-Terra

Rain Cover for X-Terra This is a pod raincover for the Minelab X-Terra 30/305, 50/505, and 70/705 models.  Part#ML30010047  

Picture Not Yet Available

Rubber Teardrop Washer This is the teardrop shaped rubber washer used to provide friction at the searchcoil on many Minelab models, including the SD/GP/GPX series units, Eureka Gold, Musketeers, Sovereigns, Excaliburs, and more. Normally two used per unit.  Part#ML30110027  

Picture Not Yet Available

Black Nylon Bolt/Wingnut 1.5" This 1.5" long nylon bolt and wingnut is used on many Minelab models to hold the coil to the lower shaft.  Part#ML30110028  

Picture Not Yet Available

Nut & Bolt for Explorer 10" This is the coil bolt for the Explorer and Quattro 10" coil.  Part#ML30110041  

Picture Not Yet Available

Heavy Duty 2" Bolt & Wing Nut This heavy duty nylon bolt and wing hut is slightly thicker than the bolt used on most Minelab detectors. It is used on the 8" coil for the Explorer II and Quattro MP. This is also the same bolt as used on the Coiltek UFO and Mini-UFO coils, except that it is black.  Part#ML30110046  

Curly Power Cable for SD/GP

Curly Power Cable for SD/GP This is a genuine Minelab replacement power cable for the one that comes stock on the Minelab SD/GP series detectors, except the SD2000. This cable is a longer lasting heavier duty power cable than that provided with the SD/GP units. You need one of these as the power cable can fail with heavy use and if it does… you are out of business! Also required if you have a spare battery and want to charge it while using your detector. This cable goes nopt work with the GPX series!  See Details Part#ML30110092  

9" Coil 18.75 kHz Xterra for 505/705

9" Coil 18.75 kHz Xterra for 505/705 This optional 18.75 kHz high frequency 9" round concentric searchcoil will only work on the Minelab X-Terra 305, 50, 505 and Minelab X-Terra 70/705 models. It will not work on the X-Terra 30. The higher frequency is ideal for enhancing signals from gold jewelry and gold nuggets. Includes scuff cover.  Part#ML30110100  

10.5" Round DD 18.75 kHz Coil

10.5" Round DD 18.75 kHz Coil This round 10.5" DD coil changes the Minelab X-Terra 50 and X-Terra 70 models to the 18.75 kHz higher frequency mode of operation. This coil will cover more ground and get more depth in difficult ground than the stock X-Terra coil. It is the perfect companion for the X-Terra 70 Beach mode and prospectors looking for extra depth will also find it a worthwhile addition. This coil will not work on the X-Terra 30. Scuff cover included.  Part#ML30110103  

6" Coil 18.75 kHz X-Terra 705

6" Coil 18.75 kHz X-Terra 705 This optional 18.75 kHz high frequency 6" round DD searchcoil for the X-Terra 70/705. The higher frequency is ideal for enhancing signals from gold jewelry and gold nuggets. The DD design handles mineralized soil better than a concentric coil and provides better target separation. This coil will also work on other X-Terra models with the exception of the X-Terra 30.  Part#ML30110105  

Power Lead for GPX-4000/4500/4800/5000

Power Lead for GPX-4000/4500/4800/5000 This is the genuine Minelab 5 pin power cord that comes standard with the GPX-4000, GPX-4500, GPX-4800, and GPX-5000. It will not work with previous Minelab models.  See Details Part#ML30110192  

Battery with Amplifier for Minelab GPX 5000

Battery with Amplifier for Minelab GPX 5000 This is the genuine Minelab lithium-ion battery with amplifier that comes stock with a new Minelab GPX 5000. A built-in LED indicator signals when the battery is charging and when it is fully charged. A fully charged battery lasts about 12 hours so a spare battery can extend the time between charges to about 24 hours of detecting. Note that some aftermarket coils can drain the battery at a higher rate and reduce your operating time by up to 30%. You also have the option of having one battery charge while the other is in use. The Minelab Lithium-ion battery contains an amplifier which automatically increases the audio level when a correctly wired external speaker is used. The Minelab Lithium-ion battery will automatically detect if headphones or a speaker is in use and adjust the audio level accordingly. This battery is compatible with the GPX 4000, GPX 4500, GPX 4800, and GPX 5000. It will not work with other Minelab detectors.  See Details Part#ML30110227  

Picture Not Yet Available

Lower Isolator Rod for SD/GP/GPX This is a replacement fiberglass rod for the Minelab SD and GP series detectors. An extra rod is a must in case you experience breakage in the field. They are also popular to keep mounted on accessory coils for quick switches. Note that the ML30110027 teardrop washers and ML30110029 nylon bolt are NOT included. Order these items separately.  Part#ML80170005  

Blue Neoprene Cover for GP

Blue Neoprene Cover for GP This neoprene protective control box cover for the Minelab GP series detectors will help keep your control box from getting scuffed up, while still allowing for easy control access. The exterior of the neoprene is covered with blue nylon and emblazoned with the Coiltek logo.  Part#MLAC-CGP  

Heavy Duty Detector Bungee

Heavy Duty Detector Bungee Take the weight of your Minelab SD or GP detector off your arm! This extra heavy-duty bungee is the ideal replacement for the support bungee that comes with the Minelab SD and GP units. It instantly adjusts for proper length, even while you are still moving. You start up a ridge, and the bungee goes slack, reach down, pull the bungee out of the patented V Groove adjustment hook, tug it back into place and you have perfectly adjusted the bungee instantaneously. This bungee is much less likely to stretch and wear out than the thinner Minelab bungee. Swing those big coils all day long without fatigue! The hook/lock assembly simply hooks over the detector rod, and the quick release snap on the other end snaps onto the Minelab harness. This bungee can be easily adapted for use with other detectors, the main thing required is something on your shoulder to hook to, like a backpack strap.   See Details Part#MLAC-CJB  

Picture Not Yet Available

Fiberglass Handle for SD/GP Rather than having the upper part of your detector shaft being metal, this gives you a heavy duty fiberglass shaft all the way up to your control box. The more metal you keep away from the coil of your detector the more sensitive the detector is, especially if you use large coils a lot. Comes complete with an extra long heavy duty lower rod, and works with all Minelab lower fiberglass rods.  Part#MLACFSO  

Picture Not Yet Available

Gold Screamer Ampifier for SD/GP This is a signal amplifier that will bring those faint signals up so loud that they will make you sit up and take notice. Made specifically for the Minelab SD or GP (four pin) detectors. Plugs into the control box, and then your power cord plugs into the amplifier. Runs off of the Minelab battery and consumes about 10 minutes of battery time in a days worth of use. Attaches to side of detector with supplied Hook and Loop fabric. Has a volume control only for dependable no gadgets reliability. Not for use with the GPX detectors.  Part#MLACGSAD  

Picture Not Yet Available

Swing Arm Helper Handle This swing arm gives you a second handle to hold onto when swinging your detector! Just like when using a brushcutter, this extra handle helps give you better control while sharing the weight on both arms. An absolute must for extra large coils or anyone experiencing arm strain running a detector. Clips to the detector shaft when not in use.  Part#MLACSA  

DeTacc PLUS Signal Amp for GPX

DeTacc PLUS Signal Amp for GPX This is a beefy, reliable signal amplifier that will bring those faint signals up so loud that they will make you sit up and take notice. Made specifically for the Minelab GPX detectors. Plugs into the control box, and then your power cord plugs into the amplifier. Runs off of the Minelab battery and consumes about 10 minutes of battery time in a days worth of use. Amplifies signals approximately 4 times! You will wonder how you ever lived without it. Exclusive filtering system gives clean amplified sound without annoying "hum" found in some other amplifiers. Attaches to side of detector with supplied Hook and Loop fabric. Has a volume control only for dependable no gadgets reliability. Important note - this amp works great with the GPX-4000. The new GPX-4500/4800/5000 has an amp built into the new Minelab battery and so we do not recommend using this amp in conjunction with the Minelab battery for the GPX-4500/4800/5000. However, this amp is perfect for those using the Coiltek aftermarket batteries with the GPX units since the Coiltek battery system does not have an amplifier built in.  Part#MLAC-SEDPX  

DeTacc External Speaker

DeTacc External Speaker This external speaker has a standard 1/4" male headphone jack and will work with many models of metal detectors. It has no built in amplifier or battery and so runs off the detector battery. It may be used in conjuction with the DeTacc PLUS signal amp or it can be used alone with the Minelab GPX-4500/4800/5000 units which have their own amplifier built into the battery. New slimline version is only 2-1/2" x 2-1/2" and 1" thick. Has a clip to snap onto a belt, suspender, or strap.  See Details Part#MLAC-SES  

Detector Support Harness

Detector Support Harness This is the heavy-duty bungee combined with an ingenious harness that act in tandem to take the weight of your metal detector off your arm. Do not undersetimate what long hours of swinging that detector can do to your arm. Use this support harness to completey support the weight of your detector so all you need to do is move it back and forth.  See Details Part#MLAC-ST  

Short Charger Lead for SD/GP

Short Charger Lead for SD/GP This Coiltek 19" charger lead is great for use when charging the battery for your Minelab SD or GP model detector, allowing you to charge batteries while using the main curly power cord with your detector. It is also becoming popular for those who are attaching some of the newer small batteries directly to the SD/GP control box, eliminating the battery/harness system. This lead will not work with the GPX series!  Part#MLBA-CL22  

Sun Ray 5" Coil for Minelab Explorer

Sun Ray 5" Coil for Minelab Explorer The Sun Ray Stealth X-5 is a full 5" Double-D coil that is waterproof/submersible. It gets around in tight locations and you also get the added benefit of better target separation and easier pinpointing. Scuff cover included. For the Minelab Explorer S, XS, II, SE, SE Pro, E-Trac, Safari and Quattro.  See Details Part#SRX-5  

Sun Ray 8" Coil for Minelab Explorer

Sun Ray 8" Coil for Minelab Explorer The Sun Ray Stealth X-8 is a full 8" Double-D coil that is waterproof/submersible. It gets around in tight locations better than the stock 11" Explorer coil while still getting very good depth. You also get the added benefit of better target separation and easier pinpointing. This coil has ultra stable operation and ultra light weight at less than 16 oz. Scuff cover included. For the Minelab Explorer S, XS, II, SE, SE Pro, E-Trac, Safari and Quattro.  See Details Part#SRX-8  

Online Store < Metal Detecting Equipment & Supplies < Minelab Detector Accessories

ATVs   Boats   Diving   Mining   Metal Detecting   Miscellaneous   Roadsters   Snowmobiles   Shopping   Policies   Site Map   Contact Us

Prices are F.O.B. Anchorage, Alaska unless otherwise noted. All prices and specifications are subject to change without notice.
Copyright  © Alaska Mining & Diving Supply, Inc.  3222 Commercial Drive  Anchorage, AK 99501  907-277-1741  Fax 907-279-6398    webmaster

Serving our Valued Customers since 1976