An Employee Owned Company

Pumps & Pump Accessories

Shop Online   Facebook   AMDS Forum   Site Map   Contact Us
Water pumps and pump accessories such as footvalves.

Online Store < Mining Equipment & Supplies < Pumps & Pump Accessories

Picture Not Yet Available

Rubber O-Ring for P100/P180 This is the rubber oring that seals the pump housing to the back plate of the P100 through P180 series pumps. Note: older versions of these pumps used a paper gasket.  Part#KE104B  

Picture Not Yet Available
Picture Not Yet Available

Honda GX200 Engine Only This is the Honda GX200 replacement engine for Keene and Proline 5HP-6.5HP pumps. A perfect upgrade for those that have the older, less efficient Briggs motors. Get better fuel efficiency.  Part#KE65HPH  

Pump Seal for 2HP-6.5HP Pumps

Pump Seal for 2HP-6.5HP Pumps This pump seal is used on most Keene P90 - P180 pumps used on 2HP - 6.5HP Briggs or Honda motors for at least the last 30 years. Also used on other popular brands of mining pumps with similar motor sizes, such as Proline pumps or Gold King pumps. This critical item should be in every miners spare parts kit as a burned pump seal means you are out of business until you replace it. Prime your pump properly BEFORE starting it. Never run the pump without water in it.  See Details Part#KEWPS2  

Pump Seal for 8HP-16HP Pumps

Pump Seal for 8HP-16HP Pumps This pump seal is used on most Keene P200 - P350 pumps used on 7HP - 18HP Briggs or Honda motors for at least the last 30 years. Also used on other popular brands of mining pumps with similar motor sizes, such as Proline pumps or Gold King pumps. This critical item should be in every miners spare parts kit as a burned pump seal means you are out of business until you replace it. Prime your pump properly BEFORE starting it. Never run the pump without water in it.  See Details Part#KEWPS3  

Keene 2.5HP 1.25"  Water Pump

Keene 2.5HP 1.25" Water Pump This unit features the same Honda 2.5HP motor as the WX15, but has a higher output Keene pump attached. Keene pumps forgo the self-priming feature to give you the maximum water output possible. The 1.5" intake x 1.25" output P90 pump puts out up to 100 gallons per minute and has a maximum head of 161 feet. This unit is normally used on Keene's 2" suction dredges. Since this unit is not self-priming it should be used with the Keene FV15 footvalve (not included). Weight 19 lbs.   See Details Part#KEP90GH  

GX200 Honda w/2" Output Pump

GX200 Honda w/2" Output Pump This unit features a Honda GX200 motor with a high output Keene P180 pump attached. Keene pumps forgo the self-priming feature to give you the maximum water output possible. The 2.5" intake x 2" output P180 pump puts out up to 300 gallons per minute and has a maximum head of 180 feet. This unit is normally used on Keene's 4" suction dredges and highbankers plus the popular twin engine 6" dredge. Since this unit is not self-priming it should be used with the Keene KEFV25 footvalve (not included). Weight 38 lbs.  See Details Part#KEP185H  

Picture Not Yet Available

GX200 Honda w/2" Pump on Base This unit features a Honda GX200 5.5 HP motor with a high output Keene P180 pump attached mounted on a steel base plate for extra stability. Keene pumps forgo the self-priming feature to give you the maximum water output possible. The 2.5" intake x 2" output P180 pump puts out up to 300 gallons per minute and has a maximum head of 180 feet. This unit is normally used on Keene's 4" suction dredges and highbankers plus the popular twin engine 6" dredge. Since this unit is not self-priming it should be used with the Keene KEFV25 footvalve (not included). Weight 40 lbs.  Part#KEP185BH  

Base Plate for 4 & 6.5HP

Base Plate for 4 & 6.5HP   Part#KEP2  

Footvalve 1.25"

Footvalve 1.25" Molded marlex foot valve with 1.25" inch intake, includes a plated steel strainer.  Part#KEFV14  

Footvalve 1.5"

Footvalve 1.5" Molded marlex foot valve with 1.5" inch intake, includes a plated steel strainer.  Part#KEFV15  

Footvalve 2"

Footvalve 2" Molded marlex foot valve with 2" inch intake, includes a plated steel strainer.  Part#KEFV20  

Footvalve 2.5"

Footvalve 2.5" Molded marlex foot valve with 2.5" inch intake, includes a plated steel strainer.  Part#KEFV25  

Online Store < Mining Equipment & Supplies < Pumps & Pump Accessories

ATVs   Boats   Diving   Mining   Metal Detecting   Miscellaneous   Roadsters   Snowmobiles   Shopping   Policies   Site Map   Contact Us

Prices are F.O.B. Anchorage, Alaska unless otherwise noted. All prices and specifications are subject to change without notice.
Copyright   Alaska Mining & Diving Supply, Inc.  3222 Commercial Drive  Anchorage, AK 99501  907-277-1741  Fax 907-279-6398    webmaster

Serving our Valued Customers since 1976