Log in

View Full Version : Uniprobe Detectorpro (non-head set model)

04-26-2011, 02:38 PM
Have developed osc squeal that the thresh hold control will not eliminate.

Have had this problem before. The first time it was caused by an intermittent connection at the coax connection, the second time a wire break in coiled cable to the probe.

Reassembled and soldered the coax connector fixed the first one and stabilizing the coil/wire fixed the last one.

Anybody else have similar problem and potential fix. Thanks, Mac

Steve Herschbach
04-26-2011, 03:06 PM
Yeah, I have one, same problem. It is in the coax. Keep meaning to send it in for fix but never get around to it.

05-06-2011, 07:03 AM
Thanks Steve.

What is your coil / probe resistance value?

Mine is reading ~2 ohms (range 0-200ohms).

Steve Herschbach
05-06-2011, 07:14 AM
I don't know.